Home > HARDWARE > WINDOW & DOOR HARDWARE > WINDOW HARDWARE > CASEMENT OPERATORS
Sort By:
1
Prime Line H-3553 Sash Lock Entrygard TH24003 Dual Arm Crank Handle 5-1/4 in L 1-1/8 in W Entrygard TH24000 Dual Arm Crank Handle 5-1/4 in L 1-1/8 in W
The H 3553 is an older style of casement lock-plated brass on zinc die-cast and used on older style wood casement windows. The three different keepers allow for most mounting applications whether it be a swing in or swing out casement window. Installation screws are included. Besides being used on casement windows, it is often used on cupboards and cabinets for that retro look. TH 24002 is a matching combination cover in plastic and a matching die-cast crank, both in a white finish. Both cover and crank are specifically used on the EntryGard dual arm operators TH 23076 through TH 23079. TH 24000 is a matching combination cover in plastic and a matching die-cast crank, both in a bronze finish. Both cover and crank are specifically used on the Truth EntryGard dual arm operators TH 23076 through TH 23079.
Prime-Line H 3511 Teardrop Casement Operator Prime-Line H 3505 Teardrop Casement Operator Prime Line H 3514 Square Style Casement Operator 9 in L
The H 3511 casement window operator is a right hand bronze teardrop body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driven by a 5/16 in crank spindle. The matching crank handle that fits onto the crank spindle and installation screws are included. Mounting holes available are 3-7/8 and 4-3/4 in apart. The H 3505 casement window operator is a left hand bronze teardrop body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driven by a 5/16 in crank spindle. The matching crank handle that fits onto the crank spindle and installation screws are included. Mounting holes available are 3-7/8 and 4-3/4 in apart. The H 3514 casement window operator is a left hand aluminum square body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driven by a 3/8 in crank spindle. The matching crank handle that fits onto the crank spindle and installation screws are included. Mounting holes available are 3-7/8 and 4-3/4 in apart.
Prime-Line H 3528 Reversible Casement Operator Prime Line H3507 Teardrop Style Casement Operator Prime Line H3501 Teardrop Style Casement Operator
The H 3528 is non-handed casement operator for butt-hinged casement windows. It has a 10-3/4 in rotating arm and is only 1-3/8 in between screen and sash. It is driven by a heavy cast worm gear and has a full 90 deg motion in both directions. Found on Parlyn windows as well as many others. For brass version see H 3687. Crank handle in brass included. The H 3507 casement window operator is a right hand aluminum teardrop body type. It has a 8 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driven by a 5/16 in crank spindle. The matching crank handle that fits onto the crank spindle and installation screws are included. Mounting holes available are 3-7/8 and 4-3/4 in apart. The H 3501 casement window operator is a left hand aluminum teardrop body type. It has a 8 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driven by a 5/16 in crank spindle. The matching crank handle that fits onto the crank spindle and installation screws are included. Mounting holes available are 3-7/8 and 4-3/4 in apart.
Prime Line H 3517 Square Style Casement Operator 9 in L Prime Line H-3710 Left Hand Square Casement Operator Prime Line H-3711 Right Hand Square Casement Operator
The H 3517 casement window operator is a bronze square body type. It has a 7 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driven by a 3/8 in crank spindle. The matching crank handle that fits onto the crank spindle and installation screws are included. Mounting holes available are 3-7/8 and 4-3/4 in apart. The H 3710 casement window operator is a left hand white square body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driven by a 3/8 in crank spindle. The matching crank handle that fits onto the crank spindle and installation screws are included. Mounting holes available are 3-7/8 and 4-3/4 in apart. The H 3711 casement window operator is a right hand white square body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driven by a 3/8 in crank spindle. The matching crank handle that fits onto the crank spindle and installation screws are included. Mounting holes available are 3-7/8 and 4-3/4 in apart.
Prime Line H 3520 Square Style Casement Operator 9 in L Prime Line H 3523 Square Style Casement Operator 9 in L Prime Line H3502 Teardrop Style Casement Operator
The H 3520 casement window operator is a right handed aluminum square body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driven by a 3/8 in crank spindle. The matching crank handle that fits onto the crank spindle and installation screws are included. Mounting holes available are 3-7/8 and 4-3/4 in apart. The H 3523 casement window operator is a right handed bronze square body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driven by a 3/8 in crank spindle. The matching crank handle that fits onto the crank spindle and installation screws are included. Mounting holes available are 3-7/8 and 4-3/4 in apart. The H 3502 casement window operator is a left hand aluminum teardrop body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driven by a 5/16 in crank spindle. The matching crank handle that fits onto the crank spindle and installation screws are included. Mounting holes available are 3-7/8 and 4-3/4 in apart.
Prime Line H 3508 Teardrop Style Casement Operator 9 in L Prime-Line H 3687 Reversible Casement Operator Prime Line H 3708 Teardrop Style Casement Operator 9 in L
The H 3508 casement window operator is a right hand aluminum teardrop body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driven by a 5/16 in crank spindle. The matching crank handle that fits onto the crank spindle and installation screws are included. Mounting holes available are 3-7/8 and 4-3/4 in apart. The H 3687 is a brass non-handed casement operator for butt-hinged casement windows. It has a 10-3/4 in rotating arm and is only 1-3/8 in between screen and sash. It is driven by a heavy cast worm gear and has a full 90 deg motion in both directions. Found on Parlyn windows as well as many others. For zinc version see H 3687. Crank handle in brass included. The H 3708 casement window operator is a left hand white teardrop body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driven by a 5/16 in crank spindle. The matching crank handle that fits onto the crank spindle and installation screws are included. Mounting holes available are 3-7/8 and 4-3/4 in apart.
Prime Line H 3709 Teardrop Style Casement Operator 9 in L Prime-Line TH 23031 Right Hand Single Arm Casement Operator Prime-Line TH 23028 Left Hand Single Arm Casement Operator
The H 3709 casement window operator is a right hand white teardrop body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driven by a 5/16 in crank spindle. The matching crank handle that fits onto the crank spindle and installation screws are included. Mounting holes available are 3-7/8 and 4-3/4 in apart. Replacing the old Truth EntryGard Series the TH 23031 is a right handed, 13-1/2 in single arm operator with a baked enamel white finish. It is made of heavy-duty die-cast zinc. The steel arm, worm drive and gears are protected with a corrosive-resistant finish and it opens to a full 90 deg. The plastic roller on the end of the arm insure a smooth operation as it slides through the TH 22397 track. When installing, the housing easily fastens down to the window sill. Replacing the old Truth EntryGard Series the TH 23028 is a left handed, 13-1/2 in single arm operator with a baked enamel white finish. It is made of heavy-duty die-cast zinc. The steel arm, worm drive and gears are protected with a corrosive-resistant finish and it opens to a full 90 deg. The plastic roller on the end of the arm insure a smooth operation as it slides through the TH 22397 track. When installing, the housing easily fastens down to the window sill.
OPERATOR SNGL ARM RT HND BRZ Prime Line TH23022 Single Arm Casement Operator with Crank Prime Line TH23025 Single Arm Casement Operator with Crank
Replacing the old Truth EntryGard Series the TH 23023 is a right handed, 9-1/2 in single arm operator with a baked enamel bronze finish. It is made of heavy-duty die-cast zinc. The steel arm, worm drive and gears are protected with a corrosive-resistant finish and it opens to a full 90 deg. The plastic roller on the end of the arm insure a smooth operation as it slides through the TH 22397 track. When installing, the housing easily fastens down to the window sill. Replacing the old Truth EntryGard Series the TH 23022 is a left handed, 9-1/2 in single arm operator with a baked enamel white finish. It is made of heavy-duty die-cast zinc. The steel arm, worm drive and gears are protected with a corrosive-resistant finish and it opens to a full 90 deg. The plastic roller on the end of the arm insure a smooth operation as it slides through the TH 22397 track. When installing, the housing easily fastens down to the window sill. Replacing the old Truth EntryGard Series the TH 23025 is a right handed, 9-1/2 in single arm operator with a baked enamel white finish. It is made of heavy-duty die-cast zinc. The steel arm, worm drive and gears are protected with a corrosive-resistant finish and it opens to a full 90 deg. The plastic roller on the end of the arm insure a smooth operation as it slides through the TH 22397 track. When installing, the housing easily fastens down to the window sill.
E-Gard TH23076 Dual Arm Casement Operator 4-1/2 in L E-Gard TH23077 Dual Arm Casement Operator 4-1/2 in L
TH 23076 is a left handed dual arm operator with a 4-1/16 in offset (up) link arm. The long continuous arm and the jointed arm create an action that pushes the sash open while pulling the hinge side of sash to the open position. This is the mechanism only - no cover or crank handle included (optional). The heavy-duty die-cast zinc operator base, worm drive, gears as well as the steel arms and stud bracket are protected with the corrosive-resistant E-Gard? coating process. TH 23077 is a right handed dual arm operator with a 4-1/16 in offset (up) link arm. The long continuous arm and the jointed arm create an action that pushes the sash open while pulling the hinge side of sash to the open position. This is the mechanism only - no cover or crank handle included (optional). The heavy-duty die-cast zinc operator base, worm drive, gears as well as the steel arms and stud bracket are protected with the corrosive-resistant E-Gard? coating process.
   
 
1