|
|
|
|
|
|
|
|
|
|
|
|
|
|
White Lightning? FLAME BUSTER? High heat fire and smoke blocking latex caulk is a one component caulk designed to resist high-temperatures and smoke in non-rated construction. It is most commonly used around wires, pipes, ducts and vents in wood or steel framed non-rated construction.
|
3M? Fire block sealant FB 136, a one component, water-based, non-combustible draft, smoke and fireblocking sealant designed to resist high temperatures and smoke passage in non-rated construction.
|
Great Stuff? fire block insulating foam sealant is a ready-to-use, minimal-expansion insulating foam sealant that fills and insulates gaps up to 3/4 in to restrict airflow. This distinctly orange solution seals electrical wiring run through wall studs as well as service penetrations in walls and between floors to provide a simple, cost-effective way to maintain the continuity of an approved fire block material throughout the house.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Engineered to form a monolithic seal after drying, 3M? Fire Barrier Sealant IC 15WB+ is a yellow, one-part, gun-grade, intumescent firestop sealant that provides up to 3 hr fire protection in tested and listed systems. This helps prevent the spread of fire, smoke and noxious gas, while also acting as an acoustic barrier to help minimize noise transfer.
|
Our 3M? Fire Barrier Sealant FD 150+ is a gun-grade, latex-based, elastomeric sealant that cures upon exposure to the atmosphere to form a monolithic flexible firestop seal. When properly installed, this sealant helps control the spread of fire, smoke and noxious gasses before, during and after exposure to a fire and exhibits excellent adhesion to a full range of construction substrates.
|
We formulated this fire sealant to dry and form a monolithic firestop seal that also acts as a barrier to airborne sound transmission. 3M? Fire Barrier Sealant CP 25WB+ is a red, one-component, gun-grade, latex-based, intumescent firestop sealant. This fire barrier sealant helps control the spread of fire, smoke and noxious gases before, during and after exposure to a fire.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed specifically for use type VA, occupancy group R3 and R5 (wood frame) buildings, to seal openings in concealed spaces to resist the migration of fire and hot gases. The fire block foam cures upon reaction with moisture to form a flexible, urethane foam that is effective against the passage of smoke and toxic gases through service penetrations. Foam adheres to most types of building materials including wood, concrete, brick, metals, cable jacketing and will not harm PVC, CPVC and PEX pipe/tubing. It complies with all Federal and State VOC regulations.
|
Metacaulk? MC 150+ is an elastomeric, one-component, general-purpose, fire-rated sealant and smoke seal for construction joints and through-penetrations. A water-based, non-sag caulking grade sealant that is easy to apply as well as to retrofit. Can be applied to horizontal and vertical surfaces. Cures to a paintable flexible seal. Suitable for areas of dynamic movement. Application temperature 40 to 120 deg F. An economic choice for most common applications. Sound Transmission Class (STC) rating 65, The test was performed in accordance with ASTM E90, Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions.
|
White Lightning? FLAME BUSTER? fire & smoke blocking silicone sealant is designed to block the spread of smoke and fire. It forms a water-resistant seal that will also resist smoke and toxic gases, ultraviolet radiation and ozone.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BLOCKADE? is a single component, water-based intumescent acrylic firestop sealant. BLOCKADE meets ASTM E 814/UL 1479 specification for Fire Tests of Penetration Firestops. Intumescent product expansion fills the void created by combustible materials burned during a fire. BLOCKADE treats general firestopping applications for combustible and noncombustible penetrations and also has exceptional sealant qualities, such as superb unprimed adhesion, excellent flexibility, easy gunning and is paintable once fully cured.
|
We formulated 3M? fire barrier watertight sealant 1000 NS as a single component, neutral cure, silicone sealant. This ready-to-use sealant cures upon exposure to atmospheric humidity to form a flexible firestop seal that helps control the spread of fire, smoke and noxious gases before, during and after exposure to fire. When properly installed, this watertight sealant provides up to 3 hrs protection in tested and listed systems and meets UL water leakage test, W Rating - Class 1 requirements for systems tested and listed in accordance with ANSI/UL 1479. We designed this non-slump firestop sealant as a re-enterable and repairable solution primarily used on vertical surfaces.
|
One component, general purpose fire rated sealant and smoke seal for construction joints and through-penetrations. Extremely intumescent, non-sag caulking grade sealant. Cures to an elastomeric seal that is suitable where dynamic movement is expected. 10.3 oz covers about 18 cu-in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DAP? Fire Stop is a single component, neutral cure, gun-grade silicone firestopping sealant. It is an elastomeric, high performance sealant capable of meeting the joint movement requirements in a fire-rated joint. Fire Stop is tested for up to a 4-hr fire-resistance-rated system at independent laboratories and is approved for both through penetrations and joint applications.
|
We formulated this fire sealant to dry and form a monolithic firestop seal that also acts as a barrier to airborne sound transmission. 3M? Fire Barrier Sealant CP 25WB+ is a red, one-component, gun-grade, latex-based, intumescent firestop sealant. This fire barrier sealant helps control the spread of fire, smoke and noxious gases before, during and after exposure to a fire.
|
OSI FlameSeal? fire, smoke and draft stop sealant is a non-flammable, latex-based fire stopping sealant. This one component sealant is designed for use in both residential and commercial fire stopping applications. Developed to seal service penetrations and joints in fire separations and firewalls, it prevents the passage of flame, smoke and fumes under actual fire conditions of 1 hr, 2 hr and 3 hr fire resistance rated systems. It improves STC values and upgrades sound quality. OSI FlameSeal? utilizes a special waterborne technology that is both non-flammable and non-hazardous and cleans up easily with water. Cured product is also mold-and mildew-resistant.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
650-B Cylinder containing the Polyol part for the Froth Pak 650 Kit. Must purchase the 650-A and a Gun Hose Assembly.
|
650-A Cylinder containing the ISO part for the Froth Pak 650 Kit. Must purchase 650-B and a Gun Hose Assembly.
|
|
|
