STEP - FIBERGLASS

Home > PAINT & SUNDRIES > SUNDRIES > LADDERS > STEP - FIBERGLASS

Sort By:

1 2


Louisville FS4004 Step Ladder, 102 in Max Reach H, 3-Step, 225 lb, Type II Duty Rating, 3 in D Step, Fiberglass Our Price: $72.49	Louisville FS1500 Series FS1502 Step Stool, 2-Step, 300 lb, 3 in D Step, Fiberglass, Orange/Silver Our Price: $72.69	WERNER 6002 Step Ladder, 8 ft Max Reach H, 2-Step, 250 lb, Type I Duty Rating, 3 in D Step, Fiberglass, Blue Our Price: $78.35

This Louisville 4 ft non-conductive fiberglass step ladder has a load capacity of 225 lb, rated ANSI Type II. This ladder is equipped with the innovative ProTop? with multiple tool slots, SHOX impact absorption system, slip-resistant rubber boot, pinch-resistant spreader braces and wide back braces. The Louisville FS4004 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.	This Louisville 2 ft non-conductive fiberglass step stool has a load capacity of 300 lb, rated ANSI Type IA. This ladder is equipped with a wide top, pinch-resistant spreader braces, heavy-duty gusset bracing and angled aluminum slip-resistant rubber feet.	The 6002 fiberglass 2 ft step stool has a large molded top that provides a comfortable working platform. This hearty step stool has a duty rating of 250 lb and the bottom step has front and rear knee braces. The external spreaders are PINCH-PROOF? and the TRACTION-TRED? steps are slip-resistant.


WERNER 5906 Step Ladder, 10 ft Max Reach H, 5-Step, 225 lb, Type II Duty Rating, 3 in D Step, Fiberglass, Green Our Price: $84.45	LADDER STEP FBRGLS TYPE1 4FT Our Price: $86.59	WERNER 5904 Step Ladder, 8 ft Max Reach H, 3-Step, 225 lb, Type II Duty Rating, 3 in D Step, Fiberglass, Yellow Our Price: $88.35

The 5906 fiberglass 6 ft step ladder has a duty rating of 225 lb with braces on the top step and top horizontal. Featuring a high performance HolsterTop? with a paint and tool holder, these step ladders have slip-resistant, TRACTION-TRED? steps and external PINCH-PROOF? spreaders. The EDGE? molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.	Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3".	The 5904 fiberglass 4 ft step ladder has a duty rating of 225 lb with braces on the top step and top horizontal. Featuring a high performance HolsterTop? with a paint and tool holder, these step ladders have slip-resistant, TRACTION-TRED? steps and external PINCH-PROOF? spreaders. The EDGE? molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.


WERNER 6005 Step Ladder, 9 ft Max Reach H, 4-Step, 250 lb, Type I Duty Rating, 3 in D Step, Fiberglass, Blue Our Price: $98.15	Louisville FS2005 Step Ladder, 113 in Max Reach H, 4-Step, 250 lb, Type I Duty Rating, 3 in D Step, Fiberglass Our Price: $102.15	LADDER STEP FBRGLS TYPE1A 4FT Our Price: $102.35

The 6005 fiberglass 5 ft step ladder features a HolsterTop? with the Lock-In System? that allows you to customize your ladder top. The system secures tools from falling while keeping them handy while working increasing productivity on the job. The tops also hold tools and have a sturdy paint can hanger on the back side. The external spreaders are PINCH-PROOF? and the TRACTION-TRED? steps are slip-resistant. This step ladder has a duty rating of 250 lb and offers the EDGE? bracing for enhanced strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.	This Louisville 5 ft non-conductive fiberglass step ladder has a load capacity of 250 lb, rated ANSI Type I. This ladder is equipped with the innovative ProTop? with magnet and multiple tool slots, SHOX impact absorption system, slip-resistant rubber boot, pinch-resistant spreader braces, wide back braces and double-rivet step construction. The Louisville FS2005 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.	Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.


Louisville FS4006 Step Ladder, 6 ft H, Type II Duty Rating, Fiberglass, 225 lb, 5-Step, 124 in Max Reach Our Price: $103.15	Werner 6204 Step Ladder, 4 ft H, Type IA Duty Rating, Fiberglass, 300 lb, 3-Step, 8 ft Max Reach Our Price: $107.05	Louisville FS2006 Step Ladder, 6 ft H, Type I Duty Rating, Fiberglass, 250 lb, 5-Step, 124 in Max Reach Our Price: $110.59

This Louisville 6 ft non-conductive fiberglass step ladder has a load capacity of 225 lb, rated ANSI Type II. This ladder is equipped with the innovative ProTop? with multiple tool slots, SHOX impact absorption system, slip-resistant rubber boot, pinch-resistant spreader braces and wide back braces. The Louisville FS4006 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.	The 6204 fiberglass 4 ft step ladder is ideal for the homeowner or the professional. With a duty rating of 300 lb, it features a HolsterTop? with the Lock-In System? to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy-duty internal spreaders. All steps are knee braced and the foot pads are riveted to the EDGE? structure. The EDGE? bracing system helps protect the rail from damage. Each TRACTION-TRED? step is slip-resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.	This Louisville 6 ft non-conductive fiberglass step ladder has a load capacity of 250 lb, rated ANSI Type I. This ladder is equipped with the innovative ProTop? with magnet and multiple tool slots, SHOX impact absorption system, slip-resistant rubber boot, pinch-resistant spreader braces, wide back braces and double-rivet step construction. The Louisville FS2006 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.


LADDER STEP FBRGLS TYPE1A 4FT Our Price: $117.59	DeWALT by Louisville DXL3110 Series DXL3110-06 Step Ladder, 6 ft H, Type I Duty Rating, Fiberglass, 250 lb, 5-Step Our Price: $123.69	Louisville FS4008 Step Ladder, 147 in Max Reach H, 7-Step, 225 lb, Type II Duty Rating, 3 in D Step, Fiberglass Our Price: $124.75

Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and multiple tool slots and comfort when climbing the ladder. Pinch-resistant internal spreader braces provide stability. Double-riveted steps. Heavy duty boot with maximum slip-resistant surface area.	This 6 ft non-conductive DEWALT? fiberglass step ladder has a load capacity of 250 lb, rated ANSI Type I. This ladder features an innovative top with magnet and multiple tool slots, an impact absorption system, slip-resistant aluminum shoes, wide back braces and double-rivet step construction. This DEWALT? DXL3110-06 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.	This Louisville 8 ft non-conductive fiberglass step ladder has a load capacity of 225 lb, rated ANSI Type II. This ladder is equipped with the innovative ProTop? with multiple tool slots, SHOX impact absorption system, slip-resistant rubber boot, pinch-resistant spreader braces and wide back braces. The Louisville FS4008 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.


WERNER 5908 Step Ladder, 12 ft Max Reach H, 7-Step, 225 lb, Type II Duty Rating, 3 in D Step, Fiberglass, Yellow Our Price: $126.08	LADDER STEP FBRGLS TYPE1 4FT Our Price: $127.75	Louisville FS1506 Step Ladder, 6 ft H, Type IA Duty Rating, Fiberglass, 300 lb, 5-Step, 125 in Max Reach Our Price: $129.73

The 5908 fiberglass 8 ft step ladder has a duty rating of 225 lb with braces on the top step and top horizontal. Featuring a high performance HolsterTop? with a paint and tool holder, these step ladders have slip-resistant, TRACTION-TRED? steps and external PINCH-PROOF? spreaders. The EDGE? molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.	Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.	This Louisville 6 ft non-conductive fiberglass step ladder has a load capacity of 300 lb, rated ANSI Type IA. This ladder is equipped with the new and innovative raptor top with magnet and multiple tool slots, SHOX impact absorption system, new raptor boots with non-marring bonded tread mechanically fastened to the upper boot to create a secure slip-resistant footing, inside spreader braces, wide back braces and double-rivet step construction. The Louisville FS1506 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.


Werner 6006 Step Ladder, 6 ft H, Type I Duty Rating, Fiberglass, 250 lb, 5-Step, 10 ft Max Reach Our Price: $129.99	Louisville FXS1504 Cross Step Ladder, 4 ft H, Type IA Duty Rating, Fiberglass, 300 lb, 4-Step, 102 in Max Reach Our Price: $132.85	WERNER 6205 Step Ladder, 9 ft Max Reach H, 4-Step, 300 lb, Type IA Duty Rating, 3 in D Step, Fiberglass, Yellow Our Price: $133.99

The 6006 fiberglass 6 ft step ladder features a HolsterTop? with the Lock-In System? that allows you to customize your ladder top. The system secures tools from falling while keeping them handy while working increasing productivity on the job. The tops also hold tools and have a sturdy paint can hanger on the back side. The external spreaders are PINCH-PROOF? and the TRACTION-TRED? steps are slip-resistant. This step ladder has a duty rating of 250 lb and offers the EDGE? bracing for enhanced strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.	This Louisville 4 ft fiberglass cross step ladder has a type IA duty rating with load capacity of 300 lb. This ladder combines the shelf and step ladder for a 2-in-1 combination made to take on multiple placement locations. The shelf design and its unique ProTop? and innovative locking mechanism allows for positioning against a wall, building or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The cross-step ladder is equipped with a V-shape ProTop? with non-marring slip-resistant rubber tread that allows it to be placed safely on corners and poles. This ladder's ProTop? also features a magnet and multiple slots that allow quick and easy access to your tools.	The 6205 fiberglass 5 ft step ladder is ideal for the homeowner or the professional. With a duty rating of 300 lb, it features a HolsterTop? with the Lock-In System? to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy-duty internal spreaders. All steps are knee braced and the foot pads are riveted to the EDGE? structure. The EDGE? bracing system helps protect the rail from damage. Each TRACTION-TRED? step is slip-resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.


Werner 6206 Step Ladder, 6 ft H, Type IA Duty Rating, Fiberglass, 300 lb, 5 -Step, 10 ft Max Reach Our Price: $143.15	DeWALT by Louisville DXL3010-06 Step Ladder, 124 in Max Reach H, 5-Step, 300 lb, Type IA Duty Rating, 3 in D Step Our Price: $147.55	WERNER 6008 Step Ladder, 12 ft Max Reach H, 7-Step, 250 lb, Type I Duty Rating, 3 in D Step, Fiberglass, Blue Our Price: $154.35

The 6206 fiberglass 6 ft step ladder is ideal for the homeowner or the professional. With a duty rating of 300 lb, it features a HolsterTop? with the Lock-In System? to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy-duty internal spreaders. All steps are knee braced and the foot pads are riveted to the EDGE? structure. The EDGE? bracing system helps protect the rail from damage. Each TRACTION-TRED? step is slip-resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.	This 6 ft non-conductive DeWALT? fiberglass step ladder has a load capacity of 300 lb, rated ANSI Type IA. This ladder features an innovative top with magnet and multiple tool slots, 25% greater step surface, an impact absorption system, heavy-duty boots with non-marring bonded tread mechanically fastened to the upper boot to create a secure slip-resistant footing, inside spreader braces, wide back braces and double-rivet step construction. This DeWALT? DXL3010-06 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.	The 6008 fiberglass 8 ft step ladder features a HolsterTop? with the Lock-In System? that allows you to customize your ladder top. The system secures tools from falling while keeping them handy while working increasing productivity on the job. The tops also hold tools and have a sturdy paint can hanger on the back side. The external spreaders are PINCH-PROOF? and the TRACTION-TRED? steps are slip-resistant. This step ladder has a duty rating of 250 lb and offers the EDGE? bracing for enhanced strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.


WERNER L6200 Series L6204 Leaning Ladder, 7 ft 3 in, 8 ft 4 in Max Reach H, 4-Step, 300 lb, Fiberglass, Orange/Yellow Our Price: $161.69	DeWALT by Louisville DXL3110-08 Step Ladder, 7-Step, 250 lb, Type I Duty Rating, 3-3/4 in D Step, Fiberglass Our Price: $162.15	Werner 6200 Series 6208 Step Ladder, 8 ft H, Type IA Duty Rating, Fiberglass/Plastic/Rubber/Steel, 300 lb, 7-Step Our Price: $162.35

The L6204 Fiberglass 4 ft Leaning Ladder is ideal for the professional. With a duty rating of 300 lb, it features the LEANSAFE? ladder top that secures tools and accessories and is uniquely designed to securely lean against flat wall surfaces, wall corners, poles and wall studs and perform as a standard stepladder. LEANSAFE? ladders have a lower rear rail to front rail connection point allowing the user to get closer to the work when in stepladder mode. Leaning a ladder safely requires that the rear rail is latched to the front rail. Werner's patent pending single latch design stays engaged when needed and is centrally located to easily open and close.	This 8 ft non-conductive DeWALT? fiberglass step ladder has a load capacity of 250 lb, rated ANSI Type I. This ladder features an innovative top with magnet and multiple tool slots, an impact absorption system, slip-resistant aluminum shoes, wide back braces and double-rivet step construction. This DeWALT? DXL3110-08 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.	The 6208 fiberglass 8 ft step ladder is ideal for the homeowner or the professional. With a duty rating of 300 lb, it features a HolsterTop? with the lock-in system to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy-duty internal spreaders. All steps are knee braced and the foot pads are riveted to the EDGE? structure. The EDGE bracing system helps protect the rail from damage. Each Traction-Tred? step is slip-resistant and double-riveted. Fiberglass rails are non-conductive for working near electricity.


Louisville FXS1506 Cross Step Ladder, 6 ft H, Type IA Duty Rating, Fiberglass, 300 lb, 6-Step, 124 in Max Reach Our Price: $168.55	Louisville FS2008 Step Ladder, 8 ft H, Type I Duty Rating, Fiberglass, 250 lb, 7-Step, 147 in Max Reach Our Price: $176.99	Louisville FS1508 Step Ladder, 8 ft H, Type IA Duty Rating, Fiberglass, 300 lb, 7-Step, 147 in Max Reach Our Price: $191.95

This Louisville 6 ft fiberglass cross step ladder has a type IA duty rating with load capacity of 300 lb. This ladder combines the shelf and step ladder for a 2-in-1 combination made to take on multiple placement locations. The shelf design and its unique ProTop? and innovative locking mechanism allows for positioning against a wall, building or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The cross-step ladder is equipped with a V-shape ProTop? with non-marring slip-resistant rubber tread that allows it to be placed safely on corners and poles. This ladder's ProTop? also features a magnet and multiple slots that allow quick and easy access to your tools.	This Louisville 8 ft non-conductive fiberglass step ladder has a load capacity of 250 lb, rated ANSI Type I. This ladder is equipped with the innovative ProTop? with magnet and multiple tool slots, SHOX impact absorption system, slip-resistant rubber boot, pinch-resistant spreader braces, wide back braces and double-rivet step construction. The Louisville FS2008 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.	This Louisville 8 ft non-conductive fiberglass step ladder has a load capacity of 300 lb, rated ANSI Type IA. This ladder is equipped with the new and innovative raptor top with magnet and multiple tool slots, SHOX impact absorption system, new raptor boots with non-marring bonded tread mechanically fastened to the upper boot to create a secure slip-resistant footing, inside spreader braces, wide back braces and double-rivet step construction. The Louisville FS1508 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA.


	1 2