|
|
|
|
|
|
|
|
|
|
|
|
|
|
J-B Weld? Static Mixers are easy-to-use attachments for any of J-B Weld? 25 mL syringes that allow for precise mixing of our two-component adhesives. Each mixer comes with 16 static elements to ensure complete mixing. The mixer tip can be cut to allow for larger and easier flow of material. The mixer opening should be adjusted as needed for thicker paste J-B Weld? adhesive materials or for a larger bead size, as desired. KwikWeld?, J-B Weld?, MarineWeld?, WoodWeld? and PlasticBonder? are all thicker paste adhesives that may benefit from a larger opening at the mixer tip. ClearWeld?, PlasticWeld?, and MinuteWeld? should flow freely through all mixer opening sizes as they are more fluid. Do not cut the tip on or above the last tapered ridge as the mixing elements could escape. Each mixer should be used within the cure time of the product. Curing will continue for any mixed, but unused portions.
|
DEWALT Mixing Nozzle, Plastic, Dimensions: 8 in L, Suitable for: AC100+ Gold 10 oz and 12 oz Cartridge System
|
Brushes are used for cleaning drilled holes prior to adhesive anchor installation. Brushes have a twisted wire handle with nylon bristles. For use with Simpson Strong-Tie? ET-3G? adhesives.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Brushes are used for cleaning drilled holes prior to adhesive anchor installation. Brushes have a twisted wire handle with nylon bristles. For use with Simpson Strong-Tie? ET-3G? adhesives.
|
Simpson Strong-Tie? AMN19Q mixing nozzles ensure proper proportioning and mixing of Simpson Strong-Tie? acrylic formulations. Required for compliance with manufacturer's installation instructions.
|
An 18-element mixing nozzle with integrated nut for use with 10 oz, 22 oz and 56 oz epoxy adhesive cartridges.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The AC100+ Gold is a two-component vinylester adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The adhesive is designed for bonding threaded rod and reinforcing bar elements into drilled holes in concrete and masonry base materials. It can be considered for use in solid base materials as well as hollow base materials with screen tubes.
|
AT-3G? is a hybrid, acrylic-based adhesive for anchoring threaded rod and rebar into cracked and uncracked concrete. Ideal for cold weather and wet concrete applications, AT-3G? dispenses easily and offers a fast curing time for same-day bolt up. It can be specified for a wide range of in-service temperatures and maintains its strong bond strength in extreme environments for ultimate design and jobsite flexibility. Tested and code compliant with the IBC and IRC, AT-3G? hybrid adhesive is easy to install with the conventional blow-brush-blow hole-cleaning method.
|
SET-3G is an epoxy-based anchoring adhesive with high design strength and proven performance. SET-3G is a 1:1 ratio, two-component, anchoring adhesive for concrete (cracked and uncracked). SET-3G installs and performs in a variety of environmental conditions and temperature extremes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The CDT10S features a steel carriage for ultimate durability and is engineered for continuous, high-volume use. The CDT10S also features double-gripping plates that help extend tool life.
|
SET-3G is the latest innovation in epoxy anchoring adhesives from Simpson Strong-Tie. Formulated to provide excellent performance in cracked and uncracked concrete at elevated temperatures, SET-3G installs and performs in a variety of environmental conditions and temperature extremes. The exceptional bond strength of SET-3G results in high design strengths.
|
The EDT22S epoxy adhesive tool features a steel carriage and is engineered for high-volume, continuous use. The tool can be easily converted (conversion parts included) from dispensing a 22 oz 1:1 ratio cartridge to a 16.5 oz 2:1 ratio cartridge.
|
|
|
